Using The Phone In A Partner Group - Bosch Integral TM13 Operating Instructions Manual

Using the phone in a partner group

Your BOSCH TELECOM service representative can connect up to 8 telephones to
form a partner group. A number of functions are particularly easy to use within this
partner group.
The display provides you with information on the activities of every partner.
Information on the partner display
Your partner has activated a call diversion.
"
A call diversion to this partner has been activated.
A
A
Partner display or partner beep has been activated.
This symbol only appears while you are setting up the partner beep!
or
Select A if you prefer normal ringing or
Flashes alternately with partner display: Partner is called.
A Flashes alternately with partner display: Partner for whom a call diversion
/
was activated is called.
Flashes alternately with partner display: Partner is called by two different
parties simultaneously.
Partner is making a call.
Flashes alternately with partner display: Partner is busy and receives addi-
tional call.
Calling partners
Answering a call for a partner
1234 BERT 11.11.94 16:50
FULL MEYE MILL EDDI JACK
SAMM
FULL Press the desired partner key.
e.g.
Dial.
The call number is dialed.
A partner phone rings. The corresponding
partner display flashes.
GARA GAIL AIRP
Press the partner key.
JONE
e.g.
The call is diverted to your phone. It rings.
You can now accept the call.
Using the phone in a partner group
if you prefer the alerting tone.
A
53