Kenwood KVT-935DVD Instruction Manual page 16

Tuner Control
Seek Mode
Sets a station selection.
SEEK
If SEEK is not shown, touch Next .
The mode is switched each time you touch the
button.
Tunes in a station with good
AUTO 1
reception automatically.
Tune in stations in memory one
AUTO 2
after another.
Switches to the next channel
MANUAL
manually.
Auto Memory
Stores stations with good reception in memory
automatically.
1 Select a band you wish to store in memory
FM
AM
2 Select the Auto Memory mode
AME
If AME is not shown, touch .
Next
3 Start Auto Memory
Touch or .
Auto Memory terminates when 6 stations are stored
or when all stations are tuned in.
The operation ends automatically if you do not
operate within 10 seconds.
30 English
Manual Memory
Stores the current receiving station in memory.
1 Select a station you wish to store in memory
FM AM
2 Store in memory
1 —
6
If 1 to 6 are not shown, touch Next .
Continue to touch until the memory number appears.
Preset Select
Lists and tunes in stations in memory one after
the other.
1 Call the Tuner Menu
MENU
2 Call the Preset Select Menu
Preset Select
1
4
2
3 FM1
P6 87.9 MHz
2
FM 1 Preset 3 87.9 MHz
1 Tunes in the displayed station.
If the station name is displayed if it has been set.
(KVT-935DVD (NTSC TV type)/945DVD/965DVD)
2 Switches the band of the displayed station list.
3 Band Display.
4 Returns to the Tuner Menu.
Function of KVT-935DVD (NTSC TV type)/945DVD/965DVD
Set Station Name
Names a station.
1 Tune in a station you wish to name
FM
AM
Call the Tuner Menu
2
MENU
3 Selects the Set Name mode
Name Set
4 Enter a name
For character entry details, see <Character Entry>
(see page 43).
5 Exit the Set Name mode
OK
• You can store up to 30 stations in memory.
• When you are receiving the traffic information,
you can also name the traffic information
station in the same way as above. (Function of
KVT-935DVD (NTSC TV type))
• You can set a station name only after you have
applied the parking brake.
English 31