Contents CD/MP3/WMA/Disc Changer Play Control..34 TV Setup <Function of KVT-935DVD (PAL TV Before Use ..............4 type)/ 945DVD/965DVD> ........64 • Displaying the Easy Control Panel About discs ............6 • Displaying the CD/MP3/WMA/Disc Changer • Displaying the TV1 Area Set Up screen Notes on playing MP3/WMA ........7...
(e.g., coins or metal tools) inside the unit. KNA-DV2600 • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood Loading and Replacing the battery dealer. • Do not touch the liquid crystal fluid if the LCD is 1.
About discs Notes on playing MP3/WMA Handling discs Removing discs This unit can play MP3 (MPEG1, 2 Audio Layer 3)/WMA. Entering file and folder names Note, however, that the MP3 recording media and • Don’t touch the recording surface of the disc. When removing discs from this unit pull them out The code list characters are the only file names and folder formats acceptable are limited.
Opening/Closing the Monitor and Power Switch Removing/Attaching the Protection Panel Open the monitor Remove the protection panel [OPEN/CLOSE] key Close the monitor Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Two hooks Then, push the left end of the panel to lock it.
KVT-935DVD (PAL TV type) Basic operation 1 Play Disc 8 Track/Station Selectors When the monitor is open [Disc insertion slot] [Up] /[Down] key A disc is played when you insert it. Selects a music or chapter, track, or frequency. 2 Stop to Play...
KVT-935DVD (NTSC TV type)/945DVD/965DVD Basic operation 1 Play Disc 8 Track/Station Selectors When the monitor is open [Disc insertion slot] [Up] /[Down] key A disc is played when you insert it. Selects a music or chapter, track, or frequency. 2 Stop to Play...
Basic Operations of Remote Controller 6 Joystick q [DVD] [DISC] Selects an option from the DVD Disc Menu. Right or left: Selects a chapter, a track or a song. w [TV] [TUNER] Up or down: Select a folder or a disc. 1 —...
SCREEN MODE V.SEL V.OFF AV OUT SEL V.OFF AV OUT SEL KVT-935DVD (PAL TV type) Full picture mode [FULL] KVT-935DVD (NTSC TV type)/945DVD/965DVD Justify picture mode [JUST] Cinema picture mode [CINEMA] Zoom picture mode [ZOOM] Normal picture mode [NORMAL] • When the Menu, Easy Control screen, or Navigation is selected, it is shown in the full-size display mode automatically.
Page 10
Control during DVD Video, DVD Audio or Video CD Playback Control during DVD Video, DVD Audio or Video CD Playback Various control screens appear when you play back a DVD Video (DVD-V), a DVD Audio (DVD-A) or a Video CD (VCD) disc. Displaying the DVD/VCD Displaying the Easy Control Playback screen...
Control during DVD Video, DVD Audio or Video CD Playback Displaying the DVD-V/DVD-A/ VCD Control screen o Adjusts the volume. Plays a DVD/VCD using various functions. ; Ejects the disc from the built-in disc player. a Calls the Sound Effects Menu. (see page 45) s Switches the source.
Control during DVD Video, DVD Audio or Video CD Playback DVD Disc Menu VCD Zoom Control Direct Search Select Disc Menu options Selects an option from the DVD Disc Menu. Displays an enlarged VCD screen. You can search for a DVD/VCD chapter, scene Disc Menu or track by entering its number.
You can tune in a TV station using various functions. y Calls the TV Menu. 2 TV Area Group Display u Calls the Sound Effects Menu. (see page 68) <Function of KVT-935DVD (PAL TV type)> (see Selects the page 64) TV Pictures.
TV Control Seek Mode Manual Memory Set Station Name Function of KVT-935DVD (NTSC TV type) Direct Search Sets a TV station selection. Stores the current receiving channel in Names a station. Tunes in a station when its channel number is memory.
(see page 30 for the <Seek Mode>) Displaying the Easy Control Panel p Calls the Setup Menu. (see page 45) q Switches to the FM1/2/3 band. • For receiver key operations, see <KVT-935DVD/ w Switches to the AM band. 945DVD/965DVD Basic Operations> (see page 10/12).
Page 16
Tuner Control Seek Mode Manual Memory Preset Select Function of KVT-935DVD (NTSC TV type)/945DVD/965DVD Set Station Name Sets a station selection. Stores the current receiving station in memory. Lists and tunes in stations in memory one after Names a station.
Tuner Control Direct Search Function of KVT-935DVD (PAL TV type) Function of KVT-935DVD (PAL TV type) Function of KVT-935DVD (PAL TV type) Traffic Information Search for Program Type Radio Text Tunes in a station when its frequency is When a traffic bulletin starts, any source is A program is tuned when you set its program You can display the radio text.
Fast Forwards or Rewinds. Selects a disc. y Selects a track. u Plays or pauses. • For CD/MP3/WMA/Disc Changer playback and receiver key operations, see <KVT-935DVD/ i Starts or stops Scan Play (that plays the beginning DISP SCRL TIME 945DVD/965DVD Basic Operations>...
Page 19
CD/MP3/WMA/Disc Changer Play Control MP3/WMA Control screen Disc Changer Control screen During MP3/WMA play During play by the disc changer I Selects a track. / Ejects a disc. Starts Fast Forward or Fast Rewind when it is held z Fast Forwards. down.
CD/MP3/WMA/Disc Changer Play Control Set Disc Name Select Folder (during MP3/WMA play) Names a CD. The folders of an MP3/WMA disc are listed for Play a CD you wish to name quick search. Displaying the CD/MP3/WMA/ Call the CD/Disc Changer Menu Disc Changer Menu screen Call the MP3/WMA Menu Selects options from various function menus.
CH Disc Select MP3/WMA: Folder, File Enter a disc or track number — Search 6.KENWOOD When searching for a song: ENTER 1 Scrolls the list. 1 Plays the displayed disc. 2 Selects the Disc Name or Disc Text mode for text display.
Source Select Mute Telephone Character Entry Mute Telephone How To Use the Character Source Select Entry screen The source you wish to listen to can be selected quickly. When the telephone is called, the system is paused automatically. When you select the Set Disc Name mode or others, the following screen appears for Displaying the Control screen When the telephone is called...
Adjusting the Monitor Display Position and Quality Setup Menu Adjusting the Monitor Display Position and Quality Setup Menu You can adjust the position and picture quality of the monitor. You can set up various receiver parameters. Displaying the Screen Control Displaying the Control screen screen 1 Brightness Control...
Setup Menu Audio Set Up You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up Displaying the Speaker Set Up screen screen 1 Adjusts the volume. 9 Selects a speaker to be set. If your vehicle type is selected, the Digital Time When the speaker type and size are set, the speaker (see <Speaker Set Up>, page 48)
Setup Menu Speaker Set Up Channel Level Select a speaker type Select a speaker type and its size to get the best Set the volume at each setup position. sound effects. Select a speaker you wish to adjust Select a speaker you wish to adjust You can select any of the following speaker types.
Setup Menu DTA Setup Crossover Network Setup Speaker Setup Memory Set a delay time Manually set the sound output timing of each You can manually set a crossover frequency of You can store all of speaker and crossover channel. speakers. setup in memory simultaneously.
Setup Menu DVD Setup You can set up the DVD play. Displaying the DVD SETUP 1 Displaying the DVD SETUP3 screen screen 1 Adjusts the volume. t Displays the Parental Lock screen.* OFF) (See <Parental Level Setup>, page 55) 2 Returns to the Control screen of the previous DVD SETUP source.
Setup Menu Language Setup Parental Level Setup Language Code Table Display the Parental Level Setup screen Abbreviation Language Abbreviation Language Afar Latvian, Lettish Select a language you use for the speech and Sets a parental level. Abkhazian Malagasy Enter menus. Afrikaans Maori Display the Parental Level code number screen...
Setup Menu System Setup You can set up the system parameters. Displaying the System 1 Displaying the System 2 screen screen 1 Adjusts the volume. 9 Selects an illumination color of receiver keys. Red) 2 Returns to the Control screen of the previous "Green"...
Uses the front right side speaker for 5 Selects a navigation system connection. ( RGB) voice guidance. "RGB" Allows the Kenwood’s Navigation System "Front All": Uses both front speakers for voice to connect via its interface cable. guidance. "AV-IN1": Allows a third-party navigation system to connect via the AV INPUT1 port.
Setup Menu User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 Displaying the User I/F 3 screen screen 1 Adjusts the volume. y Turns the information display On or Off when a button is touched on the Source Control screen. 2 Returns to the Control screen of the previous source.
Setup Menu 1 Enters a security code. Touch Panel Adjust Security Code Setup Adjustment 2 Clears your entry. 3 Cancels the registration and returns to the You can adjust the touch panel operations. You can set a security code to protect your Security Code Setup screen.
Setup Menu TV Setup RDS Setup <Function of KVT-935DVD (PAL TV type)/945DVD/965DVD> <Function of KVT-935DVD (PAL TV type)> The TV signal receiving areas can be set. The related RDS parameters can be set. Displaying the TV1 Area Set Up Displaying the RDS Set Up1...
Setup Menu AMP Control Sets the power amp connected via the LX bus. Displaying the AMP Control screen 1 Adjusts the volume. 2 Calls the Setup Menu. 3 Calls the Sound Effects Menu. (see page 68) 4 Returns to the Control screen of the previous AMP Control screen source.
Sound Effects Menu Sound Effects Menu Audio Control You can set up the receiver sound effects. You can adjust the front and rear and right and left audio balance. Displaying the Control screen Displaying the Audio Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous Audio Control source.
Sound Effects Menu SFC Adjustment Adjust the sound field You can set up the sound field. You can adjust the sound field. Display the SFC Adjustment screen Displaying the SFC screen Exit the sound field adjustment 1 Adjusts the volume. Adjust 2 Returns to the Control screen of the previous source.
Sound Effects Menu Parametric Equalizer Equalizer Set a Q value You can set up the equalizer. You can Manually set the equalizer curve by adjusting the center frequency, gain and Q value. Displaying the Equalizer Display the Parametric Equalizer screen Store or call the equalizer curve into/from screen memory...
Sound Effects Menu Position Fine Control Position Set a delay time You can adjust the sound effects according to your listening position. You can fine-adjust your listening position. Display the Position Fine Control screen Displaying the Position screen Store or call your adjustment into/from 1 Adjusts the volume.
Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Zone Control 3 Calls the Setup Menu. (see page 45) 4 Calls the Sound Effects Menu.
Hands-Free Unit Control When called When dialing GSM control You can call the following control screens if the GSM is connected to the system. When you are called, you can use the hands- Originate a call by entering a phone number. free phone.
Enter a phone number you wish to register Clear Display the Search for Phone Book screen When you select the device, the Name Edit screen appears. — Kenwood Kenwood Return Name Edit Screen Start phone number registration The Initial Input screen appears.
The phone number is registered, the Edit Name Display a phone number you wish to register SetUp ("Name Edit") screen appears. Kenwood See the <Calling by Phone Book> (see page 80) and Edit Name ("Name Edit") screen <When dialing> (see page 79).
Hands-Free Unit Control Reading the SMS (Short Creating an SMS (Short Send the message Editing the library text Message Service) messages Message Service) message EDIT You can display messages received by the You can create a message to be sent by the SMS.
Before Installation Accessories Installation Procedure 1. To prevent a short circuit, remove the key from the 2WARNING ignition and disconnect the - battery. If you connect the ignition wire (red) and the battery wire 2. Make the proper input and output wire connections for (yellow) to the car chassis (ground), you may cause a short ..1 each unit.
Connection 2WARNING (Black) If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), Center Speaker you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
Connection Installation Connection for AV Equipments Installation for Monitor/Player Unit Firewall or metal support PREOUT Screw (M4X8) (MONO) REAR FRONT AV INPUT AV OUTPUT (commercially available) VIDEO VIDEO FM /AM ANTENNA AV INPUT POWER VIDEO CENTER Bend the tabs of the mounting sleeve ¶...
Page 47
Installation Installation on Toyota Car using Brackets at Holes shown by "¶" Installing in Japanese-Made Cars Installation on Toyota, Nissan or Mitsubishi Car using Brackets at Holes shown by "¶" When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. If so, tighten the bracket using accessories # as shown below.
Page 48
Installation Installing the Antenna Units Removing Monitor/Player Unit ¶ Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the Removing the Hard Rubber Frame (escutcheon) installation location as the tape can only be stuck on once. ¶...
Glossary Troubleshooting Guide DVD: Digital Versatile Disc Top menu/menu (DVD) Some system functions are limited to control depending on your setup. A type of disc which contains recording of Some DVDs display more than one title in a audio/video packaged media with high video and screen.
Page 50
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or No sound can be heard, or the volume is low. miswiring. Before calling service, first check the following table for possible problems. •...
Page 51
The disc player is malfunctioning. The specified track will not play. ] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues • Turn off random play or magazine random play. • Random play or magazine random play has been blinking or the disc cannot be ejected.
(KVT-935DVD(NTSC TV type)/945DVD/965DVD) Frequency range (9kHz) ........531kHz~1611kHz is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries. LW Tuner section (KVT-935DVD(PAL TV type)) Frequency range (9kHz) ........153kHz~281kHz Usable sensitivity ..............28dBµ This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual MW Tuner section (KVT-935DVD(PAL TV type)) property rights.