Software Information; User Interface; Language Setting - Kenwood DNX7140 Instruction Manual

Setup Menu
Software Information
Checks the software version of this unit.
D
Display the Software Information screen
Touch [8]
> [,...] >
[Information]
>
[Software]. (page
63)
~
Displays the software version.
b\
~
• For how to update the software, refer to the relevant
update procedure manual.
User Interface
You can setup user interface parameters.
D
Display the User Interface screen
Touch [8]
>[,...] >
[System]
>
[User
Interfacel (page
63)
II
Set the each item
[Beep] Turns the key touch tone On or Off.
([2]
"ON")
[Remote Sensor] Selects a remote control
signal.
([2]
"ON")
When turned
"OFF'~
the remote control ofTV
reception is rejected.
66 DNX7140/DNX7000EX/DDX714/DDX7034BT
[Language] Select the language used for the
control screen and setting items. (page 66)
[Scroll] Allows scrolling of text display on the
Source Control screen.
([2]
"Manual")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
[Marker] Sets whether to display the target
when touching the panel.
[Drawer Close] Sets whether to close the
function bar automatically.
([2]
"Auto")
[AUD Key Longer than 1 Second] Sets the
function of the [AUD] button. (page 10)
"V.OFF" : Press the [AUD] button for more than
1 second to turn the display off.
"R-CAM" : Press the [AUD] button for more
than
1
second to switch to rear view.
Language Setting
You can select the display language for the
control screen and audio file tags.
D
Display the User Interface screen
Touch [8]
> [,...] >
[System]
>
[User
I
nterfacel (page
63)
II
Display the Language Setting screen
II
Select a language
[Select Mode] Selects the mode to select a
language.
([2]
"Easy") (DNX models only)
Touching [Advanced] allows you to select
languages for respective items.
[Language Select] Selects a language.
([2]
"American English")
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.