(Fig. 2). groups, the model groups are described as shown below. Names of models included in each model group are as ..6 follows: DNX models (Fig. 1) (Fig. 2) DNX7340BT, DNX7340BTM DDX7 models DDX7034BT, DDX7034BTM DDX6 models ..6 DDX6034, DDX6034M DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M...
Page 3
¤ • Reception may drop if there are metal objects near the Bluetooth antenna. • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals. • Make sure to ground the unit to a negative 12V DC power supply.
Mute wire (Brown) Connect to the terminal that is grounded when either the telephone rings or during conversation. ⁄ To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, Motor antenna control wire (Blue) connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.
Page 5
Bluetooth Microphone (Accessory #) (DNX/DDX7 models only) (see page 8) Cooling fan GPS Antenna (Accessory !) (DNX models only) (see page 8) FUSE ( 15A ) Accessory 1 REVERSE REMO.CONT White/Black To front left speaker White Gray/Black To front right speaker ILLUMI Gray Green/Black...
• Painting the GPS antenna with (metallic) paint may cause a drop in performance. Adjust the direction of the microphone to the driver. ⁄ Install the microphone as far as possible from the cell-phone. DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M...
Installing the Escutcheon For General Motors For Toyota/Scion 1. Cut out accessory 6 to meet the shape of the 1. Cut out accessory 6 as illustrated. opening of the center console. Cutting line 2. Attach accessory 6 to the unit. Cut out to meet the shape of the opening in the vehicle.
Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 8 (M5x6mm) or Accessory 9 (M5x7mm) Car Bracket Accessory 8 (M5x6mm) or Accessory 9 (M5x7mm) DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M...
Removing Monitor/Player Unit Removing the Hard Rubber Frame Removing the Unit (escutcheon) 1. Remove the hard rubber frame by referring to the removal procedure in the section <Removing the 1. Engage the catch pins on the removal tool 5 and Hard Rubber Frame>.