Panasonic DBS-576 Technical Manual page 350

FF2: Trunk Programming (T1 CO)
Related Programming:
Introduction
Flash-Signal Control (pg. 3-19)
Dial Plan A: Flexible Feature Codes at Dial Tone (pg. 1-155)
Hold
Dial Plan B: Flexible Feature Codes at Dial Tone (pg. 1-157)
Hold
0
System
Configuration
Long Talk Alarm
FF1
(all CPCs) - Version 1.0 or higher
System
Enable/Disable alarm tone heard by extension user during an outbound call
on the T1 channel, if the call lasts longer than the Long Talk Alarm Timer.
FF2
Trunks
BSSCC: T1 (CO) Channel Position
FF3
B=Cabinet no. 1-6
Extensions
SS=Slot no. 01-12
CC=Channel no. 01-24
Notes:
FF4
FF-/Soft Keys
By default, individual extensions are enabled for the Long Talk Alarm (via Extension COS setting).
Related Programming:
Long Talk Alarm #1 Timer (pg. 1-134)
FF5
Long Talk Alarm #2 Timer (pg. 1-135)
Groups
Extension COS: Long Talk Alarm (pg. 1-66)
FF6
Alarm Ringing
TRS/ARS
(all CPCs) - Version 1.0 or higher
Enable/Disable Alarm Ringing for incoming calls on this T1 channel that
FF7
ring unanswered for longer than the Slide Ring/Alarm Ring Timer.
Applications
FF8
Maintenance
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
Appendix A
Appendix B
Page 2-102
FF3 0 BSSC 04 21 Hold (0 or 1) Hold
FF2 2 BSSCC
FF1 1 02 0010 Hold (0-255) Hold
FF1 1 02 0011 Hold (0-255) Hold
FF2 2 BSSCC
DBS 576 (USA) issued 05/20/98
FF1 2 02 (0001-0056) Hold (max. 4-digit Code)
FF1 2 03 (0001-0056) Hold (max. 4-digit Code)
03 10 Hold (0 or 1) Hold
0=Disable Long Talk Alarm. (default)
1=Enable Long Talk Alarm.
FF1 0 03 (00-15) 40 Hold (0 or 1) Hold
03 11 Hold (0 or 1) Hold
0=Disable Alarm Ringing. (default)
1=Enable Alarm Ringing.
Section 400-Programming
$
5! %,4 /,
$
/, 
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B