Audible Tone Features; Dial Tone - Panasonic KX-TAW848 Features Manual

1.24 Audible Tone Features

1.24.1 Dial Tone

Description
The following dial tones inform extension users about features activated on their extensions:
Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B.
Type
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Tone 4A/4B
Conditions
• Dial Tone Type A/B
Through system programming, it is possible to select dial tone type A or B for dial tones 1 through 4. If
"Type A" is selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for ARS feature can be selected separately. If "Type A" is selected for ARS, dial tone
1A will be heard. If "Type B" is selected, dial tone 1B will be heard.
• Distinctive Dial tone
Distinctive dial tone mode can be disabled. In this case, dial tone 1 will be heard.
• Dial Tone Patterns
All dial tone patterns have a default (→ 5.2.1 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in a VM (DPT/DTMF) group. (→ 1.19.1 Voice Mail (VM) Group)
A normal dial tone is heard when:
a)
No features listed for dial tones 2 through 4 has been set, or
b)
Automatic Route Selection (ARS) is used.
Heard when any one of the following features is set.
• Absent Message
• BGM
• Call Forwarding (FWD)
• Call Pickup Deny
• Call Waiting
• Do Not Disturb (DND)
• Extension Dial Lock
• Executive Busy Override Deny
• Hot Line
• Timed Reminder
Heard while a called PS is being searched, or when any one of the following
features is performed.
• Account Code Entry
• Consultation Hold
• Answering a Timed Reminder call with no message
Heard when messages are waiting for the extension.
1.24 Audible Tone Features
Description
Feature Guide 165