1.27 Audible Tone Features
1.27.1 Dial Tone
Description
The following dial tones inform extensions about features activated on the extensions:
Each dial tone type has two frequencies (e.g., dial tone 1A and dial tone 1B).
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Tone 4A/4B
Conditions
•
Dial Tone Type A/B
It is possible to select dial tone type A or B for dial tones 1 through 4. If "Type A" is
selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for the ARS feature can be selected separately. If "Type A" is selected
for the ARS, dial tone 1A will be heard. If "Type B" is selected, dial tone 1B will be heard.
•
Distinctive Dial tone
Distinctive dial tone mode can be disabled. In this case, dial tone 1 will be sent.
•
Dial Tone Patterns
All dial tone patterns have a default (
•
Only dial tone 1 is sent to the extensions in the VM (DPT/DTMF) group. (
Mail (VM) Group)
Type
A normal dial tone is heard when:
a) No features listed for dial tones 2 through 4 has been set, or
b) ARS is used.
Any one of the features below is set.
•
•
•
•
•
•
•
•
•
•
While a called PS is being searched, or any one of the features
below is performed.
•
•
•
Messages are waiting for the extension.
Description
Absent Message
BGM
FWD
Call Pickup Deny
Call Waiting
DND
Extension Lock
Executive Busy Override Deny
Hot Line
Timed Reminder
Account Code Entry
Consultation Hold
Answering a Timed Reminder call with no message
4.2.1 Tones/Ring Tones).
1.27 Audible Tone Features
1.23.1 Voice
Feature Guide
245