Flow Meter Alarm - Electrolux EN18WI30LS Use And Care Manual

How to Use

Flow Meter Alarm

Preparation
Plug the bath drain.
14
2,3
1
3
(Starting with the power off)
1
Press the Power
On/Off Button
The temperature will be displayed
on the remote control thermostat.
On
Previous set temperature (example:110°F)
On
Previous set temperature (example:40°C)
If the flow meter alarm is being used to
indicate when a tub is full:
If any hot water is being used besides
what is going into the tub, the alarm
will sound before the tub is full.
If there was water in the tub before
the fill began, or if the water is not
shut off manually when the alarm
sounds, the tub may overflow.
If there was water in the tub before
the fill began, the temperature in the
tub after it is full may be different from
the temperature setting.
Set temperature.
2
Always check
(
temperature setting
before use.
On
Check the indicator lights.
Check the indicator lights.
)
Hot
Cold
Water temperature
Water temperature