2.2 System Board (SB)
A board for installing CPUs and memory. Internal storage can be
installed in models that are more higher-end than the 2400E.
Features
n
•
Up to four SBs can be installed in a cabinet
(or up to two SBs for a 2 or 4 socket model).
•
At least one CPU and a set of memory modules (two modules) must be installed on an SB.
Up to two CPUs, 24 sets of memory modules (48 modules), one RAID card, four 2.5-inch
internal hard disk drives (HDDs) or internal solid state drives (SAS-SSDs) can be installed on
an SB.
•
Hot Plugging can be performed for internal HDDs and SAS-SSDs (in a RAID configuration).
•
RAID0, RAID1, RAID1E, RAID5, RAID6, and RAID10 are supported.
•
A hot spare disk is supported.
External Ports
n
The following ports are supported for the local KVM for a partition.
(The local KVM cannot be connected permanently.
Use the video redirection function.)
When multiple SBs are used to configure partitions,
only the external ports of the Home SB are available.
•
USB 1.1/USB 2.0 x 4 (USB Type A)
•
VGA x 1 (D-sub 15pin)
PRIMEQUEST 2000 Series Design Guide
28
USB ports
VGA port
Copyright 2014 FUJITSU LIMITED