Camera - Panasonic WJ-SX550A Operating Instructions Manual

6-5 Pan/Tilt Control (Auto/Random Panning)
The functions described below are available only when the
specified Pan/Tilt Head is used.
MODEL AUTO-PAN
K
WV-7220D
K
WV-7225
K
WV-CS400
K
WV-CS600
K
WV-BS200
K
WV-CS300
K
WV-CS500
WV-7230D Not available
WV-7260D Not available
Notes:
* K : Function is available when the WV-RC100, WV-
RC150 or WV-RC170 Receiver is also used.
Random-1: Auto Panning Head pans for a predeter-
mined time, "X" (set by the receiver), stops for 2X,
continues in same direction for "X" period, unless
Pan Limit Switch is closed, in which case unit will
pan in reverse direction for remainder of X time.
Random-2: Panning direction and time is almost
impossible to predict.
1. Select the desired camera and monitor.
Refer to the Camera Selection and Monitor Selection
on page 98.
2. Select the Pan Action (B1) Menu on the LCD by press-
ing the Cursor Key.
B1
Pan Action
Auto Random
F1 F2
3 .Press the Function (F1) Key repeatedly to turn on or
off the auto panning function.
F1
OFF:
Note: Press the Auxiliary (AUX 2) Switch, after press-
ing the Alternate (ALT) Switch, to activate the
auto panning without selecting the Pan Action
Menu.
4. Press the Function (F2) Key repeatedly to turn on or
off the random panning function.
F2
OFF:
RANDOM-1 RANDOM-2
*K *K
*K *K
Not available Not available
Not available Not available
K
Not available
K
Not available
K K
Not available *K
Not available *K
Status
F3 F4
ON: Auto
Auto
ON: Random
Random
6-6 Camera Power and Housing Control
For remote camera power operation, a 24V AC powered
camera must be installed in the housing.
1. Select the desired camera and monitor.
Refer to the Camera Selection and Monitor Selection
on page 98.
2. Select the Cam-Power and Housing (B2) Menu on the
LCD by pressing the Cursor Keys.
B2
Cam-Power Housing
Cam
F1 F2
3. Press the Function (F1) Key repeatedly to turn on or
off the camera power.
F1
4. Press the Function (F3) Key repeatedly to turn on or
off the housing wiper.
F3
5. Press the Function (F4) Key repeatedly to turn on or
off the housing defroster.
F4
Caution
To prevent premature wearing of the wiper blades,
be sure to turn off the wiper operation of a camera
before selecting another camera for viewing.
-101-
Wiper Def
F3 F4
ON: Cam
OFF: Cam
ON: Wiper
OFF: Wiper
ON: Def
OFF: Def
6