LG LDF6920WW Installation Instructions Manual

DISHWASHER
INSTAllATION INSTRUCTIONS
Please read this guide thoroughly
before installation.
To contact LG Electronics, 24 hours a day,
7 days a week:
1-800-243-0000
Or visit us on the Web at: us.lge.com
IMPORTANT SAFETY INSTRUCTIONS
&WARNING
When installing and using your dishwasher, follow basic precautions, including
the following:
• Disconnect electrical power before you start[
• All electrical wiring and grounding must
be done in accordance with national and
local codes.
• If electrical supply is damaged, it must only be
replaced by the manufacturer or its service
agent or a similar qualified person in order to
avoid a hazard.
• This dishwasher must be connected to a
hot water supply between 120°F (49°C)
and 149°F (65°C). This temperature range
provides the best washing results and shortest
cycle time. Temperature should not exceed
149°C (65°F) to prevent damage to dishes.
• This appliance must be positioned near to an
electrical power supply.
• The appliance is to be connected to the water
supply using new hoses. Old hoses should not
be reused.
• Check the dishwasher for any damage before
trying to install it. If you find any damage to
the dishwasher, please contact your dealer
or builder immediately.
GROUNDING INSTRUCTIONS
For a permanently connected dishwasher:
This appliance must be connected to a grounded
metal, permanent wiring system, or an equipment-
grounding conductor must be run with the circuit
conductors and connected to the equipment-
grounding terminal or lead on the appliance.
P/NO. 3828DD3003D