Safety precautions Notes To select TV Type (PAL or NTSC) WARNING The TV picture display can be divided roughly into To prevent injury or fire, take the following two TV formats (PAL and NTSC). They are variable precautions: depending on countries and areas. This unit has a To prevent a short circuit, never put or leave any function for changing the video format according metallic objects (such as coins or metal tools) inside...
], [ ], [ ] Moves highlight in Setting Menu. [Enter] Executes selected Menu item. [Return] Returns to the previous screen. [Exit] Returns to Digital TV Screen. [Direct] Direct TV control by touching the screen. KTC-D600E...
[Enter] button. “Software Update” Display the firmware version and update the firmware. For how to update the firmware, access Setting > Search our web site. (page 8) http://www.kenwood.com/cs/ce/ Search System Channel Preference “Common Interface” You can view the CA card information. Information Automatic Search will be displayed according to the CA card used.
• When you perform Automatic Search, the content of the recommended to use "Automatic Search". current channel list is discarded and a new list is created. To search for available channels without discarding the content of the current channel list, perform channel search from the Digital TV Screen. KTC-D600E...
Using remote controller Favorite Channel List Additional channel list You can additional and erase for TV/RADIO favorite Move the cursor over area A. channel list. Push [ ] or [ ] button to select additional Show Menu Control Screen by touching channel and then press [ENTER] button.
The device will be turned off and on automatically. Software update will start in a moment from the LOGO screen. The device will be turned off automatically when the update is finished. Press the RESET button once, then the software update process is completed. KTC-D600E...
Parental Level Setup • Do not turn off the power while update is in progress. Sets a parental level. • If the power is turned off accidentally during upgrading, turn on the power while keeping the USB stick in the slot. Show Menu Control Screen by touching The Update menu will then be activated automatically. [Menu] button. Touch [Return] button when you are finished. Touch [ ] or [ ] button to select "Preference".
[Enter] button. Language Setting > Menu Language Menu Language English Parental Control > Change Password German Spanish Italian Verify Password Dutch * * * * Touch [Return] button when you are finished. Touch [Return] button when you are finished. KTC-D600E...
Time Setup AV Setup Set the time zone of GMT (Greenwich mean time) Set the audio and video output mode. and summer time as necessary. Show Menu Control Screen by touching Show Menu Control Screen by touching [Menu] button. [Menu] button. Touch [ ] or [ ] button to select "Preference".
Page 12
+5:00 Tehran +3:30 Harare +2:00 Tokyo +9:00 Helsinki +2:00 Toronto –5:00 Hong Kong +8:00 Tunis +1:00 Islamabad +5:00 Vancouver –8:00 Istanbul +2:00 Vienna +1:00 Jakarta +7:00 Warsaw +1:00 Jerusalem +2:00 Zagreb +1:00 Johannesburg +2:00 Zurich +1:00 Kabul +4:30 (GMT) KTC-D600E...
Displaying EPG Receiving and displaying EPG (Electronic Program Guide) sent together with a program. Viewing the Program Guide You can check the programs on each channel in the EPG (Electronic Program Guide). Show Menu Control Screen by touching [EPG] button. Select the channel or time to display 1000.
Returns to the channel you were watching MENU previously. Press once to enter Setting Menu. LANG The Setting Menu consists of 4 main-menus. – Search Switches Menu language. – System SUBTITLE – Channel Switches to Subtitle language. – Preference KTC-D600E...
AUDIO Preparing the Remote Control Unit Switches to Audio language. Pull the battery sheet out from TELETEXT the remote control unit to the direction of the arrow. Switches to teletext. / To adjust volume. Volume mute only works in TV/ Radio mode.
Screw (M2.6×5mm) Bracket ............2 Bracket Screw (M2.6×5mm) Screw (M2.6 × 5mm) ......4 Bracket Audio board Digital TV Tuner (commercial product) Screw (φ4 × 16mm) ......4 Remote Control Unit ......1 KTC-D600E...
Page 17
Installing the Remote Control Sensor Inserting CA Card and CAM Paste the remote control sensor to the dashboard. Insert the CA card (Conditional Access card) and CAM (Conditional Access Module) into the card slot. Remove the paper from double-stick tape and paste it on the back of the remote control sensor.
To the Monitor unit such as a antenna is used. DVD receiver. AV Cable (Commercially available) To AV input of the monitor VIDEO: Yellow AUDIO (L): White Ignition key switch AUDIO (R): Red Car fuse box (Main fuse) Car fuse box Battery KTC-D600E...
• The relevant OSD is displayed only when the DVB-T Control in <Other Setting> (page 7 In LZ-612IR Manual) is turned on. • The relevant OSD is displayed only when the DVB-T • You can operate the Kenwood DVB-T Tuner unit Control in <Other Setting> (page 7 In LZ-612IR Manual) is connected to the Hideaway box when the DVB-T Control turned on. is turned on.
: 14.4 V INPUT” of LZ-612IR. Current Consumption • Use the remote control cable of LZ-612IR to connect the : 400 mA remote input terminal of KTC-D600E and “DVD Remote Dimensions (W × D × H) (Main unit) Out” terminal of LZ-612IR. : 188 × 144 × 30 mm Operational temperature range : -10°C ~ +60 °C Storage temperature range : -30°C ~ +85 °C...
Page 21
Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.