36
en | D6600/D6100IPv6 Operation
7.
8.
11.4
Keypad Menu Operation
11.4.1
Log In
D6600/D6100IPv6
1.
2.
Notice!
i
D6600 default password: 6600
D6100IPv6 default password: 6100
Notice!
i
The System Trouble LED flashes ON and OFF to indicate that you entered the programming
mode. The System Trouble LED continues flashing until you exit the programming mode.
3.
11.4.2
Using the Keypad
–
–
–
–
Notice!
i
Press the Cancel button to cancel the change and return to the previous menu.
11.4.3
Event Buffer Display
–
–
–
–
11.4.4
Current System Trouble Display
The system trouble light displays when there are system troubles in the buffer.
In the EVENT DATABASE:
1.
2.
3.
4.
2012.11 | 08 | 4998122704
Press the Acknowledge button.
Repeat until the reporting device(s) record(s) all outstanding messages and the display
clears.
Press the Enter button.
Enter your password.
Press the Enter button to accept the password and enter the menu.
Press the Up or Down arrow button to scroll up or down to the appropriate menu.
Press the Enter button to enter a menu.
Continue making changes to options until all changes are complete.
Press the Enter button to accept the changes.
The changes take affect upon exiting the menu.
Press the Up or Down arrow button to show event buffer contents in the order the events
are received.
Press the Enter button to view the remaining lines of each message.
Press the Up or Down arrow button to continue to browse the events in the buffer.
Press the Cancel button to exit this menu.
Press the Enter button to go to the Display Sort by Time/Date screen.
Press the Down button to go to the Display Current System Troubles screen.
Press the Enter button to go to the Current System Trouble screen.
Use the Up and Down buttons to browse the system troubles in the buffer.
Press the Cancel button to exit this menu.
Installation and Operation Guide
Conettix Communications Receiver/
Gateway
Bosch Security Systems, Inc.