Display Brightness; Nly ); Direct Channel; Monitor / Squelch Off - Kenwood TK - 7160 Instruction Manual

D B
ISPLAY RIGHTNESS
You can toggle the display brightness between high and low by pressing the key
programmed as LCD Brightness.
• The default brightness level is set to high.
D C
IRECT HANNEL
On TK-7160/ TK-8160 transceivers, press the key programmed as Direct Zone-
Channel to immediately select the lowest channel of the lowest zone.
On TK-7162/ TK-8162 transceivers, press the key programmed as Direct CH to
immediately select the lowest channel.
M / S
ONITOR QUELCH
You can use the key programmed as Monitor/ Squelch Off to listen to weak
signals that you cannot hear during normal operation and to adjust the volume
when no signals are present on your selected channel.
• The icon appears on the display while Monitor/ Squelch Off is activated.
Your dealer can program a key with one of 4 functions:
• Monitor: Momentarily press to deactivate QT, DQT, DTMF, 5-tone, or FleetSync
Signaling. Press the key again to return to normal operation.
• Monitor Momentary: Press and hold to deactivate QT, DQT, DTMF, 5-tone, or
FleetSync Signaling. Release the key to return to normal operation.
• Squelch Off: Momentarily press to hear background noise. Press the key again to
return to normal operation.
• Squelch Off Momentary: Press and hold to hear background noise. Release the key
to return to normal operation.
■ Squelch Level
If a key has been programmed as Squelch Level, you can readjust your
transceiver's squelch level:
1 Press the key programmed as Squelch Level.
• The icon and the current squelch level appears on the display.
2 Press the <B and C> keys to select the desired squelch level.
3 Press the S or
Adjustment mode.
26
(TK-7160/ TK-8160 O
O
FF
key to store the new setting and exit Squelch Level
)
NLY