Fujitsu LifeBook E752 Bios Manual page 16

L I F E B O O K E / P / S / U B I O S G u i d e
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to enable or disable a wide variety of devices and
controllers, depending upon system configuration.
Serial ATA Controller:
SATA Controller Mode Selection:
Bluetooth(R):
LAN Controller:
Wireless LAN:
Wireless LAN/WiMax
Wireless LAN/Bluetooth:
Modem
Fingerprint Sensor:
Wireless WAN:
Internal Camera:
SD Card Slot:
SD Card/Memory Stick Slot:
Smart Card:
USB 3.0 Controller:
F1 Help
ESC Exit
Table 9: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Serial ATA Controller:
SATA Controller Mode Selection:
Bluetooth(R):
LAN Controller:
Wireless LAN:
Wireless LAN/WiMax:
Wireless LAN/Bluetooth:
Modem:
16
Phoenix SecureCore(tm) Tiano Setup
Advanced
Internal Device Configurations
Select Item -/Space
/
Select Menu Enter
/
Figure 9. Internal Device Configuration Submenu
Options Default
Disabled [Enabled]

Enabled

IDE [AHCI]

AHCI

Disabled [Enabled]

Enabled

Disabled [Enabled]

Enabled

Disabled [Enabled]

Enabled

Disabled [Enabled]

Enabled

Disabled [Enabled]

Enabled

Disabled [Enabled]

Enabled

[Enabled]
[AHCI]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
F9
Change Values
F10
Select ► Sub-Menu
Model Description
All Enables or disables the Serial ATA controller.
All Allows you to select the SATA controller opera-
tion mode if Serial ATA Controller is set to
Enabled.
All Enables or disables the Bluetooth device.
All Enables or disables the LAN controller.
All Enables or disables the Wireless LAN controller.
All Enables or disables the Wireless LAN/WiMax
feature.
E752, S752, Enables or disables the Wireless LAN/Bluetooth
S762 combo module.
E752, S752, Enables or disables the Modem device.
S762, P772
Item Specific Help
[Disabled]
Serial ATA port is
disabled.
[Enabled]
Serial ATA port is
enabled.
Setup Defaults
Save and Exit