CHAPTER 2 DEPENDENCE FUNCTIONS
2.5.6.2
Displaying Trace Data Storage Status
It is possible to displays how much trace data is stored in the trace buffer. This status
data can be read by specifying /STATUS to the SHOW TRACE command.
■ Displaying Trace Data Storage Status
It is possible to displays how much trace data is stored in the trace buffer. This status data can be read by
specifying /STATUS to the SHOW TRACE.
[Example]
>SHOW TRACE/STATUS
en/dis
buffer full = nobreak
code
loop compress = enable
frame no. = -00120 to 00000 ; Frame -120 to 0 store data
>
260
= enable
; Trace function enabled
; Buffer full break function disabled
= enable
; Code execution enabled
; loop compress function enabled