Sharp AR-C260P Key Operator's Manual page 16

G Checking the Colours
The standard colour chart included with the printer is used to check the colours on the printed test page.
Follow the steps below to check the colours.
[Test page (printed by the printer)]
Color Balance Adjustment Level
Low Density Mid Density
C M Y Bk C M Y
Easy Calibration Adjustment Level
Low Density Mid Density
Standard colour chart
Test page
If the result of the comparison is that:
G
There is a large deviation in the colour densities, use the Colour Balance (see the
following page).
G
There is a small deviation in the colour densities, use Easy Calibration (see page 18).
High Density
Bk C M Y Bk
High Density
Easy Calibration Adjustment Level
Low Density Mid Density
DESCRIPTION OF PROGRAMS
[Standard colour chart (included with the printer)]
Place the colour chart on
the printed test page as
shown. Check the density
of the colours on the test
page and see if they are
adjusted to the same level
as the colours on the
standard colour
High Density
chart.
15