Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
■ When the type is "iSCSI-RA (for the connection of older devices)"
When the type is "iSCSI-RA (for the connection of older devices)", specify the following
items:
●
Port Settings
•
Port
Select the target port or select the copy source port.
The location options for the selected port are displayed:
-
CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
●
TCP/IP Settings
•
IP Address
Enter the IP address of the target port (required).
Click the [Test Connection (ping)] button to display the
(page
367). Specify the IP address to check the connection status of the connection
destination device and the number of transmissions. Click the [Send] button. When the
"ping" command is sent, the settings of the IP address and the connection path for the
destination device can be checked.
The following input conditions apply:
-
1 - 3 numeric characters
-
First text box: "1" - "255"
-
Other text box: "0" - "255"
•
Subnet Mask
Enter the subnet mask of the target port (required).
The following input conditions apply:
-
1 - 3 numeric characters
-
All text boxes: "0" - "255"
•
Default Gateway
Enter the default gateway IP address of the target port.
-
1 - 3 numeric characters
-
All text boxes: "0" - "255"
●
iSCSI Settings
•
iSCSI Name
Enter the iSCSI name of the target port.
Click the [Default] button to set the default iSCSI name.
The following input conditions apply:
-
Alphabetic characters (lower case) and numeric characters
-
Symbols "-"(hyphen), "." (period) and ":"(colon)
-
The name starts with "jpn." or "eui."
-
Up to 223 characters
An iSCSI name is a unique name in the ETERNUS DX Disk
storage system. The same iSCSI name cannot be set to multiple
iSCSI ports except the device iSCSI name.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
365
"[Send Ping Command] Screen"
P2X0-1090-02ENZ0