Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to create a FC host group is as follows:
Procedure
1
2
•
To change the settings of the host groups, refer to
Group" (page
•
To add a port to an existing host group, refer to
Group" (page
•
To change the host group names, refer to
(page
333).
•
A FC host and an FCoE host can be members of the same host group.
Both "FC host" and "FCoE host" are abbreviated as "FC host" in this
guide.
Click [Add FC Host] in [Action].
Enter a host group name to be created, and select a host response to be
assigned to the host group.
•
FC Host Group Name
Specify the host group name.
An existing host group name cannot be specified. Refer to
adding FC hosts" (page 618)
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Host Response
Select a host response to be assigned to a host group.
The host response list created in the ETERNUS DX Disk storage system is displayed.
-
Windows EMPD (*1)
-
Linux EMPD (*1)
-
Solaris EMPD (*1)
-
Solaris MPxIO
-
HP-UX
-
AIX EMPD (*1)
-
AIX VxVM
-
AIX Single Path
-
VS850/SVC
-
Host responses created in the ETERNUS DX Disk storage system
-
Others
*1:
EMPD: ETERNUS Multipath Driver
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
312).
312).
for details.
296
"9.2.2.5 Modify Host
"9.2.2.5 Modify Host
"9.2.2.12 Rename FC Host"
"Naming conventions for
P2X0-1090-02ENZ0