Setup With The Quickset Guide - GE VG2050 User Manual

Step 5: Tune the TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is usually channel 3, 4 or the TV's video line input.
If you connect your VCR using the ANTIN and RF OUT
connectors with RF coaxial cable, set the 3 CH. 4 switch to
3 or 4 -- whichever channel isnt used locally.
\o
If the VCR is connected using the Audio/Video (A/V) jacks
and AN cables, select the TV's video line input with
the TV's remote control to see the VCR's picture. For more
information about video line input, see "How to Find Your
TV's Video Input Channel" in the References section of this
manual.
Step 6: Turn on the VCR
Press the POWER button on the VCR_ front panel or the VCR
remote control to turn on the VCR. The first time the VCR is
turned on, a menu screen appears.
Select a language.
Seleccione un idJoma.
Choisissez une Langue.
1 English
2 Espa_ol
3 Frangais
This is the start of a interactive setup which walks through
essential settings of the VCR.
Step 7: Setup with the QuickSet Guide
The QuickSet Guide is an automated procedure that helps set up
the VCR for first time use. Upon initial power up, the setup guide
asks which language to use for all on-screen menus.
1. Press 1 for English, 2 for Espafiol (Spanish), or 3 for
Franqais (French).
After this selection is made, just follow the rest of the step-by-
step procedures until the initial setup is complete.
(Continued on next page)
VCR Viewing Channel
! 'LI
I
AUDIO/VIDEO OUT jacks CH. 3/4 switch
When using the ANT. IN and RF OUT
jacks to connect your VCR, tune the
TV to channel 3 or 4. The 3 CH 4
switch on the back of the VCR
determines which TV channel
is used to see the VCR's output.
When using the AUDIO/VIDEO jacks
to connect your VCR, tune your TV
to the TV's Video Input Channel with
the TV's remote control. For more
information about video line input,
see "How to Find Your TV's Video
Input Channel" in the References
section of this manual.
5