Change the user name and password for the camera login
(saving on BOX)
If the camera authentication function is activated, the camera login username and password need to be regis-
tered with the BOX.
Register the login username and password in accordance with camera settings.
If camera authentication function activated, follow the steps below.
Step 1
Select "2.Settings" on the BOX configuration page (+
page 17).
→ The setup window will be displayed.
→
Step 2
Select "3.Camera authentication setting".
→ The change window for the camera login user
→
name and password will be displayed.
Step 3
Click the [Execute] button after entering the user
name and password.
→ The reboot window will be displayed when the
→
registration is successful.
The success window will be displayed when the
reboot is successful.
Caution:
• Use 4 to 31 one-byte alphanumeric characters for
both username and password.
• Images cannot be acquired if the camera login
username and password are different from the
registered ones.
21