Release Information - Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual

ETERNUS VSS Hardware Provider Modification History
This section provides a history of modifications for ETERNUS VSS Hardware Provider.
Version
1.2.0
1.3.0
•
Added the following items as displayed contents for the Backup Status
Query command (stxvquery):
-
transfer (transfer mode)
-
recovery (Recovery mode)
•
Added the following items as displayed contents for the OLU Number
Display command (stxvgetolu):
-
VOL (disk type)
-
Maxgen (maximum number of generations of SDV)
•
Changed the following event log message:
[1.1.0]
STXV0594 ERROR The VSSHP version of the source server does not
match the VSSHP version of the backup server.
[1.2.0]
STXV0594 ERROR The VSSHP version of the production server does
not match the VSSHP version of the backup server.
•
Changed the following command message:
[1.1.0]
STXV0237 ERROR Line["line number"] When the target disk is
connected to the source server, the copy set file cannot be created in
format 2.
[1.2.0]
STXV0237 ERROR Line["line number"] When the target disk is
connected to the production server, the copy set file cannot be created
in format 2.
•
Changed the following event log message:
[1.2.0 or earlier]
STXV2101 ERROR The INI file does not exist.
[1.3.0]
STXV2101 ERROR The VSSHP environment file does not exist.
6
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED

Release Information

Modification effect
P3AM-4582-03ENZ0