4. Input/output signal settings
4-6. Adjusting the output signal phase
The phase of the output video signals can be adjusted.
1 Press the [FUNC] button to light its indicator, and then press the [IN/OUT] button to display the IN/OUT
menu.
2 Turn [F1] to display the OutPhs sub menu.
<Menu display>
OutPhs
System
4/11
1H
0H
3 Turn [F], and select 0H or 1H using the System item.
0H: The output video signals are output to the system REF signal with using in-phase.
The frame synchronizer function is ON for all input signals.
1H: The output video signals are output to the system REF signal with 1H delay.
When the frame synchronizer function is ON, the output video signals are output with 1 frame + 1H
delay.
4 Turn [F3] to adjust H phase using the H-Phase item
H-Phase can be adjusted within a range of –0.5H to +0.5H.
5 Turn [F4] to adjust V phase using the V-Phase item.
V-Phase can be adjusted within a range of –100H to +100H.
Output video signal phase adjustment
Phase
H-Phase
V-Phase
H-Phase V-Phase
0
0
−1100
−100
~
~
+1099
+100
Video format
1080i/59.94i
1080/50i
70/59.94p
70/50p
480/59.94i
576/50i
Same for all formats
Adjustment range
−1100 to 1099
−130 to 1319
−85 to 84
−990 to 989
−49 to 48
−43 to 431
−100 to 100
64