3. Basic operations
Item
Chroma key
DSK
PinP
Color
STORE: This is used to store the panel settings in the preset memory.
1 Press the [FUNC] button to light its indicator, and then press the [MEMORY] button to display the MEMORY
menu.
2 Turn [F1] to display the PSMEM sub menu.
3 Turn [F], select "Store" using the Mode item, turn [F3], and set the preset memory number using the
NO.Sel item.
4 Press the [F5] switch (Exec) to store the settings.
<Menu display>
PSMEM
Mode
1/3
Store
Recall
Clear
The appears at the left of the number when data has been saved in the preset memory.
Description of setting
Chroma key reference color
Extent of Y component effect (Y-Infl)
Chroma key range
Chroma key border soft effect (Soft)
Chroma cancel amount (CANCEL)
Marker position, size
Marker aspect ratio
Key type (Type)
Key adjustment (Adjust)
Invert
Fill type
Fill matte
Edge color
Edge type
Edge width
Position, Size (X, Y, Z)
Border ON/OFF
Border width
Border soft effect amount
Border color
Density
Trimming
Trimming setting
CBGD (color background)
NO.Sel
XPT
Exec↓
■1 Disable
1~10
Enable
Hue: 354.0, Sat: 100.0, Lum: 100.0
0.0
Hue-Rad: 100.0, Sat-Rad: 50.0
0.0
0.0
(X: 5.0, Y: 5.0, Z: 5.0)
0.0
LINEAR
Gain: 100.0, Clip: 0.0, Density: 100.0
Off
Bus
Hue: 0.0, Sat: 0.0, Lum: 100.0
Hue: 0.0, Sat: 0.0, Lum: 0.0
Off
(X: 0.0, Y: 0.0, Z: 5.0)
Off
5.0
0.0
Hue: 0.0, Sat: 0.0, Lum: 100.0
100.0
Off
Left, Bottom: −40
Right, Top:
Hue: 0.0, Sat: 0.0, Lum: 100.0
50
Initial value (factory default)
+40