Package Contents; Serial Number Locations - Cisco 1600 Hardware Installation Manual

Package Contents

Package Contents
The following figure shows the package contents for the FMC 1600, 2600, and 4600. Note that the contents
are subject to change and your exact contents might contain additional or fewer items.
Figure 1: Package Contents
1
3
5

Serial Number Locations

The serial number (SN) for the FMC 1600, 2600, and 4600 is printed on the pullout asset card located on the
front panel as shown in the following figure of the FMC 1600.
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
4
Chassis
Cisco rail kit (Cisco part number 800-43376-02)
Useful Links Cisco Firepower Management
Center 1600, 2600, and 4600
The steps in the Useful Links document send you
to the documentation you need to install, set up,
and configure your FMC.
2 RJ-45 to DP9-RS232 console cable (Cisco part
number 72-3383-XX)
4 RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six
feet long (Cisco part number 72-1482-XX)
Two 10-Gb SFP+ transceivers with cables
6
Optional for all models; in package if ordered.
Overview