Table of Contents
Advertisement
Power Cord Specifications
Table 4: FMC 1600, 2600, and 4600 PIDs
PID
FMC-M5-PS-AC-770W
FMC-M5-PS-AC-770W=
FMC-M5-HDD-1.2TB
FMC-M5-HDD-1.2TB=
FMC-M5-HDD-600G
FMC-M5-HDD-600G=
UCSC-RAILB-M4
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the FMC 1600, 2600, and 4600. The jumper power cords for use in racks are available as an
optional alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note
The following power cords and jumper cords are supported.
Figure 10: Argentina (CAB-250V-10A-AR)
1
3
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
16
Only the approved power cords and jumper cords provided with the FMC 1600, 2600, and 4600 are supported.
Plug: IRAM 2073
Connector: IEC 60320/C13
Description
AC power supply
AC power supply (spare)
FMC 1600 and 4600 1.2-TB drive
FMC 1600 and 4600 1.2-TB drive (spare)
FMC 2600 600-GB drive
FMC 2600 600-GB drive (spare)
Rail kit
2
Cord set rating: 10 A, 250 V
—
Overview
Advertisement
Table of Contents
