Table of Contents
Advertisement
Course and Rudder Angle Printer
3 Transport and Storage
3.2
Transport
During the transport of the components / devices, the following regulations have to be met:
•
Protect the equipment by corresponding packing material against damage
•
Protect the equipment against dirt and dust by suitable means
•
Handle the equipment carefully by suitable means
•
Adhere the following environmental parameters requirement:
•
If available, check the humidity indicator inside the packing regularly.
•
No special transport regulations are applicable.
10000001193
Color Indication Inside Humidity
40 % patch: pink
> 40 %
50 % patch: pink
> 50 %
Note
Opening and closing the packing to exchange the desiccants must be done by
authorized packing specialists only.
Transport temperature
Humidity
Atmospheric pressure
Necessary Action
Desiccants must be replaced
Components / devices must be checked for hu-
midity,
Desiccants must be replaced,
Packaging must be checked for damages
-30 °C to +70 °C
< 80 % relative humidity, non-condensing
600 hPa to 1.400 hPa
8
Edition: 001
Advertisement
Table of Contents
