3
4
5
6
7
8
Any product which is labeled as shown is electrostatic sensitive.
If proper
this product results in damage. Every action must be done under ESD protection.
The product and all electronic parts of the product are susceptible to ESD. The product
must be handled with ESD protection especially when removing the covers, touching the
connectors or handling the product components.
All ESD sensitive parts must be packed in metallized protective bags during shipping and
handling outside any
must not be opened / closed out of an EPA.
All necessary equipment for these protective measures can be supplied (on special order)
by Anschütz.
List of Further Documents
Tab. 2: List of Further Documents
Documentation
No.
epson375160eu
List of Annex Drawings
Tab. 3: Dimensional Drawings
Drawing No.
104-034.HP010
Tab. 4: Wiring Drawings
Drawing No.
104-034.HP012
Edition: 001
Dissipative Shoes
Floor Mat
Wrist Band
Wrist Strap
Common Ground
Ground Point
Electrostatic Discharge (ESD)
ESD Protected Area
Designation
Setup Guide
Designation
Course and rudder angle printer 230 V
Designation
Course and rudder angle printer 230 V
Course and Rudder Angle Printer
precautions are not taken, handling or working on
(EPA). ESD protected spare parts packages
3
Introduction
10000001193