Advertisement
en Before using for the first time
5.4 Cooking zone
Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking:
Area
Cooking zone type
Single-circuit cooking zone
Flex Zone
→ "FlexInduction", Page 10
/
Extended FlexZone
→ "Extended FlexInduction", Page 10
Before using for the first time
6 Before using for the first time
Observe the following recommendations.
6.1 Setting Home Connect
When you first switch on the appliance, you are promp-
ted to set up your home network. The
up for a few seconds on the display panel.
Basic operation
7 Basic operation
7.1 Switching on the hob
Touch
.
▶
An audible signal sounds. The symbols for the
cooking zones and the currently available functions
light up. . . lights up next to the cooking zones.
a The hob is ready for use.
ReStart
If you switch the appliance on within four seconds of
▶
switching it off, the hob operates with the settings
that were previously set.
7.2 Switching the hob off
Touch
until the displays go out.
▶
a All cooking zones are switched off.
Note: If all of the cooking zones are switched off for
longer than 20 seconds, the hob is automatically
switched off.
7.3 Setting the power level in the cooking
zones
The cooking zone has 17 power levels, which are dis-
played from to
with intermediate values. Select the
best power level for the food and the planned cooking
process.
7.4 Cooking tips
¡ When heating up puree, cream soups or thick
sauces, stir occasionally.
¡ To preheat, set the power level 8-9.
8
5.5 Residual heat indicator
The hob has a residual heat indicator for each cooking
zone. Do not touch the cooking zone if the residual
heat indicator is lit.
Display
To begin setting up the connection, touch the
sensor and proceed in accordance with the informa-
tion given in the section entitled
→ "Home Connect ", Page 22. To exit initial set-up,
touch any sensor.
symbol lights
1.
a The . display gets brighter.
2.
a The power level has been set.
Note: If no cookware is placed on the cooking zone or
the pot is not suitable, the selected power level flashes.
After a certain period of time, the cooking zone
switches itself off.
QuickStart
▶
Changing the power level and switching off the
cooking zone
1.
2.
a The cooking zone's power level changes or the
¡ When cooking with the lid on, reduce the power
Meaning
The cooking zone is hot.
The cooking zone is warm.
Touch the
symbol for the cooking zone you re-
quire.
Select the required power level in the settings area.
If you place cookware on the hob before you switch
it on, the cookware is detected when you switch on
and the corresponding cooking zone is selected
automatically. Select the power level in the next 20
seconds, or the hob switches itself off.
Select the cooking zone.
Select the required power level in the settings range
or set it to . .
cooking zone switches itself off and the residual
heat indicator appears.
level as soon as you see steam escaping. The
cooking result is not affected by the steam escap-
ing.
Advertisement
