Advertisement
Depending on the size of the cookware and the
covered cooking surface, you can switch on the flexible
cooking zone as two separate cooking zones or as one
connected cooking zone:
MoveMode
10 MoveMode
You can use this function to change the power level of
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
10.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡ Front area = power level
¡ Middle area = power level
¡ Rear area = power level .
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section → Page 20.
Time-setting options
11 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
9.2 Activating Extended FlexInduction
Place the cookware on the flexible cooking zone so
1.
that it covers the extension.
Select the cooking zone and the power level. The
2.
displays for the cooking zone and for the extended
zone light up.
a The zone is activated.
Note: If the display does not light up, lift the cookware
and place it back on the cooking zone.
9.3 Deactivating Extended FlexInduction
Select the cooking zone and set it to
▶
tings range.
a The function has been deactivated.
10.2 Activating MoveMode
Requirement: Only place one item of cookware on a
flexible zone.
Select one of the two cooking zones in the flexible
1.
zone.
Press
.
2.
a The power level in the area in which the cookware
is located lights up in the cooking zone display next
to
.
a The function is switched on.
Note: You can change the power levels during cook-
ing.
10.3 Deactivating MoveMode
Touching
▶
a The display beside
a The function has been deactivated.
¡ Count-up timer
MoveMode en
in the set-
switches off.
11
Advertisement
