Table of Contents
Advertisement
pump. If wheels rotate slowly, the system may
prime after additional running. Check oil level
as described in
Check Hydraulic Oil and Tank
Level (page
53).
7.
Allow the machine to run several minutes
after the charge pumps are "primed" with drive
system in the full speed position. Check oil level
as described in
Check Hydraulic Oil and Tank
Level (page
53).
8.
Check hydro drive linkage adjustment.
Maintaining the Chassis
Check for Loose Hardware
Service Interval: Before each use or daily
1.
Stop engine, wait for all moving parts to stop,
and remove key. Engage parking brake.
2.
Visually inspect machine for any loose hardware
or any other possible problem. Tighten hardware
or correct the problem before operating.
54
Advertisement
Table of Contents
