Rear View - Lenovo ThinkSystem SR250 V3 System Configuration Manual

Hide thumbs Also See for ThinkSystem SR250 V3:
Table of Contents

Advertisement

1
USB 2.0 connector with Lenovo XClarity Controller management
Connect a USB 2.0 device, such as a mouse, keyboard, or other devices, to this connector.
Note: This is the only USB port that supports USB automation update of the firmware and RoT security
module.
Connection to Lenovo XClarity Controller is primarily intended for users with a mobile device running the
Lenovo XClarity Controller mobile application. When a mobile device is connected to this USB port, an
Ethernet over USB connection is established between the mobile application running on the device and the
Lenovo XClarity Controller.
Select Network in BMC Configuration to view or modify settings.
Four types of settings are available:
• Host only mode
In this mode, the USB port is always solely connected to the server.
• BMC only mode
In this mode, the USB port is always solely connected to Lenovo XClarity Controller.
• Shared mode: owned by BMC
In this mode, connection to the USB port is shared by the server and Lenovo XClarity Controller, while the
port is switched to Lenovo XClarity Controller.
• Shared mode: owned by host
In this mode, connection to the USB port is shared by the server and Lenovo XClarity Controller, while the
port is switched to the server.
2
USB 3.2 Gen 1 (5 Gbps) connector
The USB 3.2 Gen 1 (5 Gbps) connector can be used to attach a USB-compatible device, such as a USB
keyboard, USB mouse, or USB storage device.
3
Front I/O module
For more information about the front I/O module, see
4
VGA connector (optional)
Connect a monitor to this connector.
5
2.5-inch hot-swap drive bays
Install 2.5-inch hot-swap drives to these bays. See "Install a hot-swap drive" in ThinkSystem SR250 V3 User
Guide or ThinkSystem SR250 V3 Hardware Maintenance Guide.
6
Rack release latches
Press on the latch on both sides to disengage the server from the rack and slide it out.

Rear view

The rear view of the server varies by the model.
"Front I/O module" on page
24.
.
Chapter 2
Server components
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

7dcl7dcm

Table of Contents