Sensors And Touch Display With Sensors; Main Menu - Miele PDR 908 HP Operating And Installation Instructions

Sensors and touch display with
sensors
The sensors ,  and Start/Stop
and the sensors in the display respond
to finger tip contact. Every touch of a
sensor is confirmed with an audible
tone. You can adjust the volume of the
keypad tone or switch it off (see inform-
ation in "Supervisor level").
The control panel with sensors and
the touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your fin-
gers.

Main menu

After switching on the tumble dryer, the
main menu will appear in the display.
You can access all the important sub-
menus from the main menu.
Touch the sensor at any time to re-

turn to the main menu. Values set pre-
viously are not saved.


Programmes
 
Favourites Supervisor
Help
Operating the tumble dryer
 Programmes
For selecting drying programmes.
 Favourites
For selecting one of 12 favourite drying
programmes, which can be set up and
saved by the supervisor (see "Favourite
programmes" in the "Supervisor level"
chapter).
 Supervisor
You can alter the tumble dryer electron-
ics to suit changing requirements in the
supervisor level (see "Supervisor level").
 Networking
If the tumble dryer is networked, the
 symbol indicates the signal strength
of the network (SSID) to which it is con-
nected. Touch the symbol to display the
name of the network.
Help
You can display help to assist you with
the operation of the tumble dryer.
11:02

21