Kenwood IF-232C Instruction Manual page 4

Connecting cable with
DIN connectors (supplied)
Transceiver
Personal computer
Power
cable
(supplied)
RS-232C cable
AC-10 or another
DC power supply
m@ RS-232C CABLE
The IF-232C does not include the RS-232C cable, which will have to be
purchased from your computer dealer. Make sure you purchase a cable
with the correct configuration!
Pay particular attention to the wiring of pin number 2. If you are not sure
compare the information contained in your computer manual with the in-
formation contained in the illustration below. (When connecting the
IF-232C note that the only pins that are used are pin numbers 1, 2, 3, 4,
5, and 7).
@ Normal Wiring
IF-232C Personal
computer
Transceiver DIN connector RS-232C RS-232C
GND) 1 —————- 11 --------- 1. ————— 1 AA
ORD 2 rm a ae lr
RXD 5 ee ee ~ > = 3 ————> 3 BB (IN)
CTS 4 ————— 4 =-------- 4 ———_ 4 CA (OUT)
RTS 8 ———~ 5 ------- => 5 ———— > 5 CB (IN)
NC 6 6 6 6
7 ————— 7 AB
NS ———————
Connecting cable with DIN connectors RS-232C cable