Advertisement
en MoveMode
10.3 Switching off CombiZone
Touch
.
▶
MoveMode
11 MoveMode
Allows the power level of one item of cookware to be
changed by moving it from one cooking zone to an-
other. This is intended in particular for cooking with one
item of cookware.
11.1 Positioning and moving the cookware
Only use one item of cookware. Occupy one cooking
zone and move it from one zone to another according
to the required power level.
Every cooking zone has a preset power level:
¡ Front section = power level .
¡ Rear section = power level .
Time-setting options
12 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
12.1 Switch-off timer
Allows you to program a cooking time for one or more
cooking zones. Once the time has elapsed, the cook-
ing zone is automatically switched off.
Switching on Switch-off timer
Select the cooking zone and the power level.
1.
2.
Press
.
in the cooking zone lights up.
a
Set the time on the control panel.
3.
To set a cooking time of less than 10 minutes,
‒
always touch 0 before you select the required
value.
a The cooking time begins to count down.
a A signal tone sounds once the time has elapsed.
4.
Press
.
a The displays go out and the signal tone stops.
PowerBoost
13 PowerBoost
You can use this function to heat up large volumes of
water more quickly than with .
12
a The function has been deactivated.
a The two cooking zones now operate independently
of one another.
11.2 Switching on MoveMode
Select one of the two cooking zones.
1.
2.
Touch
.
and the power level for the cooking zone on which
a
the cookware is located will light up brighter.
a The function is switched on.
Note: You can change the power levels of the zones
during cooking.
11.3 Switching off MoveMode
Touch
.
▶
a The function has been deactivated.
Note: If the power level for one of the two cooking
zones is set to , the function is deactivated within ap-
prox. 10 seconds.
Changing or switching off Switch-off timer
Select the cooking zone and then touch
1.
In the settings range, change the cooking time or
2.
set to
to delete the time.
12.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
Press
repeatedly until
1.
2.
Set the desired time in the settings range.
a The time now starts to elapse.
a A signal tone sounds once the time has elapsed.
Press
.
3.
a The displays go out and the signal tone stops.
Changing or switching off the Timer
Press
repeatedly until
1.
In the settings area, change the time or set to
2.
delete the time.
.
lights up.
lights up.
to
Advertisement
