DeWalt DCS378N Original Instructions Manual page 31

18V CORDLESS HAND HELD BAND SAW
DCS378
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Max. power output
No‑load speed
Blade length dimensions
Blade width dimensions
Blade height dimensions
Max. cutting capacity
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑20:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
h, CM
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
WALT one of the
e
V
DC
W
m/min
mm
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s 2
m/s 2
EC‑Declaration of Conformity
o
Machinery Directive
Hand Held Band Saw
DCS378
DCS378
18
D WALT declares that these products described under
e
1
Technical Data are in compliance with:
Li‑Ion
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑20:2009.
530
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
174
the following address or refer to the back of the manual.
899
The undersigned is responsible for compilation of the technical
0.5
file and makes this declaration on behalf of D
12.7
86
3.8
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
75
65510, Idstein, Germany
86
16.05.2023
3
DECLARATION OF CONFORMITY
< 2.5
THE SUPPLY OF MACHINERY (SAFETY)
1.5
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60745‑1:2009+A11:2010, EN60745‑2‑20:2009.
These also products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
e
REGULATIONS 2008
Hand Held Band Saw
DCS378
EnGLIsh
WALT at
e
WALT.
29