Table of Contents
Advertisement
Available languages
Available languages
en - Supervisor level
This option is only available with an external payment system.
* The maximum programme running time is specified during initial commissioning.
- Launderette basic int. time
4 time programmes* with different temperature levels are time-controlled via the tumble
dryer electronic modules.
The set value indicates the maximum programme running time and can be modified by
the user.
* The maximum programme running time is specified during initial commissioning.
- External prog. selection
A communication module can be used to select the programme from an external ter-
minal.
Programme packages
This allows you to specify the scope of the tumble dryer programme. You can select all of
the programmes or individual programmes from the relevant programme packages.
The tumble dryer's additional scope of programmes can be configured. The programmes
are listed under "Programme chart".
Favourite progs.
After switching on, you can also select a programme via: Favourites.
12 programmes can be stored as favourites based on your own priorities and require-
ments.
These favourites will also be made available in the control options
- Launderette ext. (12 prog)
- Launderette, basic (4 prog) (the first 4 of the 12 favourites).
The control options can be defined under Controls.
Tip: You can assign a different colour to each programme. In this case, the Prog. colour al-
location setting must be set to On.
Changing Favourite programmes
Select the programme you wish to change or replace.
Confirm the programme or the setting to be changed.
Another menu opens, enabling you to select a new programme or change the parameters.
Confirm using the Save sensor control.
Your selection is now active.
Special programmes
You can put together 5 special residual moisture or time-controlled programmes and as-
sign your own programme names.
First, enter the programme name.
Select the special programme you want to change.
104
Advertisement
Chapters
Table of Contents
