Table of Contents
Advertisement
How to save energy:
Installation
The refrigeration appliance has to cool more often at higher am-
site
bient temperatures and consumes more energy in the process.
Therefore, you should:
- Install the refrigeration appliance in a well-ventilated room.
- Do not install the refrigeration appliance near to a heat source
- Protect the refrigeration appliance from direct sunlight.
- Ensure an ideal ambient temperature of 20 °C.
- Clean the ventilation gaps on a regular basis to remove any
Temperature
The colder the temperature, the higher the energy consumption.
setting
The following settings are recommended:
- 4 to 5 °C in the refrigerator section.
Use
Energy consumption is increased by heat input and impeded air
circulation. Therefore, you should:
- Only open the appliance door(s) when necessary and for as
- Always close the appliance door(s) properly after opening
- Allow hot food and drinks to cool down before placing them in
- Store food well packaged or covered.
- Do not overfill the compartments to allow air to circulate.
- Place frozen food in the fridge zone to defrost.
- Keep drawers and shelves arranged as they were when the
- Use the wall spacers. The wall spacers on the back of your re-
(heater element, cooker).
dust.
short a time as possible. Arrange the food in such a way that
makes it easy to find in the appliance.
them.
the refrigeration appliance.
appliance was delivered.
frigeration appliance are designed to ensure that the declared
energy consumption is achieved.
Saving energy
37
Advertisement
Table of Contents
