Cleaning And Care - Miele Scout RX3 Runner Operating Instructions Manual

 Carefully refit the cover of the re-
chargeable battery compartment and
close it, making sure it clicks into
place.
Scout RX3 Runner and Scout RX3
Home Vision HD (YCR-MT12)
 Carefully remove the rechargeable
battery using the tab until the plug
connection is exposed.
 Press the latch on the plug connec-
tion in order to release the plug.
 Insert the plug of the new re-
chargeable battery into the counter-
part, making sure it clicks into place.
 Store the plug connection in the side
recess.
 Insert the rechargeable battery care-
fully, making sure it is properly posi-
tioned (see right-hand side of pic-
ture).
 Carefully refit the cover of the re-
chargeable battery compartment and
close it, making sure it clicks into
place.

Cleaning and care


Risk of injury caused by rotating
roller brush.
The robot vacuum cleaner may start
without warning while maintenance
work is being carried out.
Switch the robot vacuum cleaner off
before doing any maintenance work.
To switch it off, press the I/0 switch
on the side of the robot vacuum
cleaner to the 0 position.
Robot vacuum cleaner and accessor-
ies

Risk of electric shock from mains
voltage.
If moisture gets into the robot va-
cuum cleaner and accessories, there
is a risk of electric shock.
Do not immerse the robot vacuum
cleaner or any accessories supplied
with it in water.
Observe the special cleaning instruc-
tions in the "Maintenance" section.
Clean the robot vacuum cleaner and all
plastic accessories with a commercially
available cleaner suitable for plastic.
Static charge can cause a build-up of
dust on the robot vacuum cleaner. This
should be removed using a soft, dry
cloth.
en
73