Cleaning The Roller Brush - Miele Scout RX3 Runner Operating Instructions Manual

 20-arm universal side brushes: take
hold of opposing side brushes (one
long and one short bunch per hand)
and pull them upwards to remove
them.
 6-arm carpet side brushes: take hold
of opposing elastic side brush hold-
ers (one holder per hand) and pull
them upwards to remove them.
 Remove threads and hair using the
wiper which is located on the bottom
of the cleaning tool.
 Hold the wiper over a bin.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
 Press the two cleaned side brushes
carefully onto their pins until they
audibly engage. Take care to comply
with the markings L and R.
In order to continue to achieve the
best possible cleaning results, re-
place the pair of side brushes after
approx. 1 year.

Cleaning the roller brush

Clean the roller brush as required. For
this, you will require the cleaning tool
which is located at the top of the dust
box lid.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Remove both side brushes, see
"Cleaning the side brushes".
 Release the roller brush cover and re-
move the cover.
 Remove the roller brush.
en
69