Table of Contents
Advertisement
Problem solving guide
Problem
The FlexiClip run-
ners do not push in
or pull out smoothly.
The top oven in-
terior lighting does
not turn on.
66
Cause and remedy
The bearings in the FlexiClip runners are not sufficiently
lubricated.
Lubricate the bearings with the special Miele lubricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven compartment. Other
lubricants may resinify when heated and will gum up
the FlexiClip runners. You can obtain the special Miele
lubricant from your Miele dealer or from the Miele
Customer Service Department.
The halogen lamp is faulty.
Danger of burning!
Make sure the oven heater elements are switched off.
Make sure the oven compartment has cooled down.
Disconnect the oven from the mains. Switch off at the
wall and withdraw the plug from the socket or switch
off the fuse of the electrical installation.
Turn the lamp cover a quarter turn anti-clockwise to
release it and then pull it together with its seal
downwards to take it out.
Replace the halogen lamp (Osram 66725 AM/A,
230 V, 25 W, G9).
Refit the lamp cover together with its seal and turn
clockwise to secure.
Reconnect the oven to the electricity supply.
You have selected the
oven interior lighting does not switch on in this function.
Eco Fan heat
function. The
Advertisement
Table of Contents
