Table of Contents
Advertisement
MPLS Guide
3.24.2.8
interface
Syntax
interface interface [interface...[(up to 5 max)] [interval seconds] [repeat repeat] [absolute |
Context
monitor>router>mpls
monitor>router>rsvp
Description
This command displays statistics for MPLS or RSVP interfaces at the configured interval until
the configured count is reached.
The first screen displays the current statistics related to the MPLS or RSVP interface. The
subsequent statistical information listed for each interval is displayed as a delta to the
previous display. When the keyword rate is specified, the rate-per-second for each statistic
is displayed instead of the delta.
Monitor commands are similar to show commands but only statistical information displays.
Monitor commands display the selected statistics according to the configured number of
times at the interval specified.
Default
n/a
Parameters
interface — specifies the name of the IP interface or the IP address
seconds — configures the interval for each display in seconds
repeat — configures how many times the command is repeated
absolute — displays raw statistics, without processing. No calculations are performed
rate — displays the rate per second for each statistic instead of the delta
3HE 18686 AAAB TQZZA
Monitor Commands
rate]
Values
ip-int-name | ip-address
Values
11 to 60 (MPLS)
3 to 60 (RSVP)
Default
11 (MPLS)
10 (RSVP)
Values
1 to 999
Default
10
on the delta or rate statistics.
Use subject to Terms available at: www.nokia.com
© 2022 Nokia.
MPLS and RSVP-TE
289
Advertisement
Table of Contents
