Table of Contents
Advertisement
MPLS and RSVP-TE
3.24.2.6
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
interface
Syntax
interface [ip-int-name | ip-address] statistics [detail]
Context
show>router>rsvp
Description
This command shows RSVP-TE interface information.
Parameters
ip-int-name — identifies the network IP interface. The interface name cannot be in the
ip-address — the system or network interface IP address
statistics — the IP address and the number of packets sent and received on an per-
detail — displays detailed information
Output
The following outputs are examples of RSVP-TE interface information:
Output Example
A:ALU-12# show router rsvp interface
===============================================================================
RSVP Interfaces
===============================================================================
Interface
-------------------------------------------------------------------------------
system
ip-10.10.1.1
ip-10.10.2.1
ip-10.10.3.1
-------------------------------------------------------------------------------
Interfaces : 4
===============================================================================
A:ALU-12#
276
Show Commands (RSVP)
form of an IP address. Allowed values are any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double
quotes
interface basis
• RSVP-TE Interface
(Output
• RSVP-TE Interface Detail
• RSVP-TE Interface Statistics
Use subject to Terms available at: www.nokia.com
Example,
Table
25)
(Output
Example,
Table
(Output
Example,
Total
Active
Sessions Sessions
-
-
1
1
1
1
0
0
© 2022 Nokia.
26)
Table
27)
Total BW
Resv BW
(Mbps)
(Mbps)
-
-
100
0
100
0
100
0
3HE 18686 AAAB TQZZA
MPLS Guide
Adm Opr
Up
Up
Up
Up
Up
Up
Up
Up
Advertisement
Table of Contents
