Table of Contents
Advertisement
Maintenance and Transportation
See the instructions in these sections to maintain your printer for optimum results, or to move or
transport your printer.
Cleaning Your Product
Cleaning the Platen
Cleaning the Roll Paper Feed Slot
Replacing the Cutter
Cleaning the Print Head Cap Area
Moving or Transporting Your Product
Cleaning Your Product
To keep your product working at its best, you should clean it regularly (about once a month).
Note: Do not use a hard brush, benzene, alcohol, or paint thinner to clean the product or you may
damage it. Do not use oil or other lubricants inside the product or let water get inside.
1. Remove any paper from the product.
2. Turn off the product.
3. Make sure the printer and the LCD screen have turned off and then unplug the power cable.
4. Disconnect any connected cables.
5. Use a soft, clean cloth to remove any dust or dirt from the outside of the product.
6. If your product is still dirty, dampen the cloth with a small amount of water and a mild detergent,
firmly wring it out, and then wipe the printer's surface. Then wipe away any remaining moisture with
a soft, dry cloth.
Parent topic:
Cleaning the Platen
You should clean the interior of the printer about once a month to prevent ink and paper particles from
accumulating in the printer. Carefully follow the steps here to clean the platen to remove ink, paper
particles, and lint.
Maintenance and Transportation
186
Advertisement
Table of Contents
