Page 1
大判インクジェットプリンター 本製品の組み立て作業は、 梱包用シート、 梱包材、 同梱品を作業場所の外に 片付けてから行ってください。 滑ったり、 つまづいたりして、 けがをするおそ れがあります。 Before assembling the printer, clear the work area by putting away the removed packing materials and bundled items. Working in an untidy place may cause injury. 組裝印表機之前,請先收拾好移除的保護裝置以及內附的配件,清理 工作區域。在凌亂的空間中工作可能會導致受傷。 セッ トアップガイ ド Setup Guide 組裝與設定手冊...
Do not insert objects through the slots. Take care not to spill liquid on the printer. ❏ ❏ ❏ 發生下列狀況時,請先拔下印表機的電源線並洽詢❏Epson❏授權服務中心:電源線或插頭損壞; Use only the power cord that comes with the printer. Use of another cord may result in fire or ❏ 有液體噴灑到印表機;印表機摔落或鐵架損壞;印表機無法正常操作或是列印品質與原來有明...
放置印表機的說明 ❏ 選擇一處能承受印表機重量❏(❏ESP❏9890❏約❏135❏kg、ESP❏7890❏約❏101❏kg)❏的穩定位置。 ❏ ❏ 只使用符合這台印表機電源規格的插座。 ❏ ❏ ❏ 請在下列的環境中操作印表機: 溫度:10❏至❏35°C PX-H9000 PX-H7000 溼度:20❏至❏80%❏沒有凝結 Epson Stylus Pro 9890/9908 Epson Stylus Pro 7890/7908 即使符合了上述條件,但如果環境條件不適合紙張,還是可能會無法正確列印。詳細的資料, 1864 mm 1356 mm 請查看紙張的操作說明。 避免將印表機放在過於乾燥、陽光直射、或高溫之處以維持適當的溼度。 1318 mm 903 mm ❏ 為了方便操作、維修、及通風,請預留足夠的空間。 ❏ 1218 mm 1218 mm...
Page 6
清點配件 スタンド / Stand / 腳架 PX-H7000 / Epson Stylus Pro 7890 / Epson Stylus Pro 7908 PX-H9000 / Epson Stylus Pro 9890 / Epson Stylus Pro 9908 排紙バスケット / 排紙バスケット / Paper Basket / 紙張收集籃 Paper Basket / 紙張收集籃...
Page 7
作業の流れ / Setup Flow / 安裝流程 組み立て セットアップ 自動ギャップ調整 ソフトウェアの マニュアルのご紹介 インストール Assembling Setting Up Auto Print Head Installing the Printer Seeing the Online Alignment Software Guide 組裝 設定 校正印字頭 安裝印表機軟體 請參考線上手冊...
Page 8
組み立て / Assembling / 組裝 [ [ [ [ [ [ スタンド / Stand / 腳架 専用スタンドは必ず2人以上で組み立ててくださ い。 専用スタンドの質量は、 PX-H9000:約17kg/ PX-H7000:約16kgです。 Have two people assemble the Stand (about 17 kg for ESP 9890 / 9908, about 16 kg for ESP 7890 / 7908). 需二人一同組裝腳架❏(ESP❏9890❏約❏17❏kg、❏...
Page 9
When lifting the printer unit, only hold the area highlighted in red. Otherwise, it may affect normal operation and printing. 當抬起印表機時,請務必握住紅色標示的位置。否 則,可能會影響到正常的操作和列印。 [ [ [ 排紙バスケット / Paper Basket / 紙張收集籃 PX-H7000 , Epson Stylus Pro 7890 / 7908 PX-H9000 , Epson Stylus Pro 9890 / 9908 [20]...
Page 11
[ [[ [ [ [[ [ PX-H7000 , Epson Stylus Pro 7890 / 7908 PX-H7000 , Epson Stylus Pro 7890 / 7908 黒いプラスチックの部品はパイプの奥まで確実に差し込ん でください。 Push the black plastic part all the way in the pipe. 將黑色塑膠零件完全推入橫杆中。 [ [[ [ [ [[ [...
Page 15
セットアップ / Setting Up / 設定 [ [[ [ [ [[ [ 静電気を防ぐために、 本体などの金属部分に触れながら保 護シートをはがしてください。 When you are removing the protective materials, touch a metallic part of the printer to prevent generating static electricity. 當您移除保護裝置時,請觸碰印表機的金屬部份以免 產生靜電。 [ [[ [ [ [[ [ 取り外したキャリッジロックの保護材は再輸送のために必ず...
Page 20
[ [[ [ [ [[ [ [ [[ [ ロール紙設定 印刷可能 この設定で良いですか? ROLL PAPER SETTINGS READY 非選択 ARE THESE SETTINGS OK? NO PAPER SELECTED はい いいえ...
Page 21
自動ギャップ調整 / Auto Print Head Alignment / 校正印字頭 正常に印刷できないときは、 プリンタ操作ガイド (冊子) 「困 ったときは」 を参照して対処してください。 If you cannot print properly, see "Problem Solver" in the User's Guide to solve the problem. 若無法正確地列印,請參考進階使用說明中的〝解決 問題的方法〞單元來解決問題。 [ [[ [ 日本語(Japanese)...
Page 23
ソフトウェアのインストール / Installing the Printer Software / 安裝印表機軟體 [ [[ [ [69] [71] Network [70] [ [[ [ [ [[ [ Network [ [[ [ この後は画面の指示に従ってインストールを完了させ てください。 Follow the on-screen instructions to complete the installation. 請依照螢幕上的操作說明,完成安裝步驟。...
Page 24
Windows 右の画面が表示されたら、 発行元が 「SEIKO EPSON」 で あることを確認して、 [ブロックを解除する] をクリックして ください。 If the following dialog box appears, make sure the publisher is SEIKO EPSON, and then click Unblock. 若出現如右圖所示的對話框時,請確認發行者為 〝SEIKO❏EPSON〞,然後按下『解除封鎖』鍵。 Mac OS X プリンタの追加 /Adding the Printer/ 新增印表機 Mac OS X v10.6, v10.5 アプリケーション/...
Page 25
マニュアルのご紹介 / Seeing the Online Guide / 請參考線上手冊 取扱説明書の種類 Bundled Online Guides 本製品には次の取扱説明書が付属しています。 The following online guides are contained in the Software CD-ROM. セッ トアップガイ ド (本書) User’s Guide (PDF) プリンタ操作ガイ ド (冊子) Network Guide (PDF) 用紙ガイ ド (冊子) You can open the online guides by clicking the Show Online Guide icon on the main menu of the Software CD-ROM.