Operation Setting (Monitor Mode)
Operation Setting (Schedule)
3-6-19
Changing the installer setting password
Installer Setting
Change Installer Setting Password
Installer Setting Password Verifi cation
Note
When prohibit setting was set to disable ("Not Used"),
the remote controller operation restricted button of "Op-
eration Setting" screen is not displayed on the screen.
When "Not Used" was set, the remote controller operation restricted but-
ton of "Operation Setting" screen is not displayed on the screen.
Click "Change" button of "Change Password."
a
"Keyboard (Change Installer Setting Password)"
screen is opened.
1
Enter "New Password".
b
Click "OK" button.
c
2
"Installer Setting Password Verification" screen is
opened.
Enter the same password at step
d
3
Click "OK" button.
e
"Installer Setting" screen opens.
4
Notes
If you forget the password the subsequent installer set-
ting will be impossible.
Make a note of the password so as not to forget the
password.
5
again.
b
En-41