Kns Communication Log; Kns User Registration; Kns Users List; Registering User Information - Kenwood TS-890S Instruction Manual

KNS Communication Log

Logs recording communication with remote station during KNS
operation can be recorded to a file.
1 Select KNS Menu [8] "Access Log".
2 Press F4 [SELECT].
3 Press F2 [–]/ F3 [+] to select "On".
• When a USB flash drive is selected as the destination for
storing the file, create a communication log file in the
"\KENWOOD\TS-890\KNS_LOG" folder and record the
logs to this file.
• When the built-in memory is selected as the destination, the
communication log file is saved to "\KNS_LOG" in the built-
in memory.
• The log file is named kns_log.csv.
• It is possible to switch the destination for storing the
communication log files from the built-in memory to
"\KENWOOD\TS-890\KNS_LOG" in the USB flash drive.
(Please refer to "Configuring the Destination for Saving
Files" (11-2))
• If writing of the KNS communication log failed due to
insufficient memory (including the case where the
destination for writing data to is the USB flash drive and the
USB flash drive is not recognized), a message indicating
that writing has failed appears on the KNS information
screen.

KNS User Registration

Follow the steps below to register a new KNS user.

KNS Users List

This is a list of the registered users.
1 Press [MENU].
2 Press F [KNS] to display the KNS status screen.
• If F [KNS] is not displayed, press F [MORE] to display F
[KNS].
3 Press F7 [U.LIST] to display the KNS Users List
screen.
.
NETWORK/KNS OPERATION 15

Registering User Information

1 Press F6 [ADD] to display the user registration
screen.
.
2 Press F2[
]/ F3[
register.
3 Press F4 [EDIT].
• For the "User Name", "Password" and "Description" fields,
use the function keys, [MULTI/CH] control or USB keyboard
to enter a character string.
.
4 After input is complete, press F6[OK].
The edited information is now set.
• Up to 32 characters can be entered for "User Name" and
"Password", and up to 128 characters for "Description".
• A maximum of 100 users can be registered.
• The "User Name" and "Password" fields must be entered.
• Input of a user name that is already registered is not allowed.
• Both "User Name" and "Password" are case-sensitive.
Key
F1 [SPACE] Inserts a space.
F2 [–]/ F3 [+] Selects a character.
F4 [ ]/ F5
Moves the cursor.
[ ]
F [BACK SPACE] Deletes the character to the left of the cursor.
F [DEL] Deletes the character to the right of the cursor.
Switches the type of character to edit. Pressing
the key each time switches the selection in the
F [CHAR] following sequence:
ABC (upper case) → !"# (symbols) → ABC
(upper case)
• The "RX Only" and "Disabled" options can be selected or
deselected using F4 [
5 Press F6 [SAVE] to complete the registration.
• Pressing F7 [CANCEL] discards information that is input on
the user registration screen and returns the display to the
KNS Users List screen.
] to select the item to
Behavior
].
15-5