Table of Contents
Advertisement
3.4
Grounded product instructions
Warning: Incorrect connection can result in electrical shock. Speak to an approved electrician if you are not
sure if your mains outlet is correctly grounded.
•
Do not do modifications to the power plug from its factory specification. If the power plug or power
cord is damaged or must be replaced, speak to your Husqvarna service agent. Obey local regulations
and laws.
•
If you do not fully understand the instructions about the grounded product, speak to an approved
electrician.
•
Use only grounded extension cables with grounding plugs and grounding outlet that accepts the
product power plug.
•
The product has a grounded power cord and power plug. Always connect the product to a grounded
mains outlet. This decreases the risk of electrical shock.
•
Do not use electrical adapters with the product.
3.5
Extension cables
•
Use only approved extension cables with sufficient length.
•
The rated value on the extension cable must be the same or higher than given on the rating plate of
the product.
•
Use grounded extension cables.
•
Keep the connection to the extension cable dry and off the ground.
•
Keep the extension cable away from heat, oil, sharp edges or moving parts. A damaged cable
increases the risk of electrical shock.
•
Make sure that the extension cable is in good condition and not damaged.
•
Do not use the extension cable while it is wound up. This can cause the extension cable to become too
hot.
•
Make sure that the extension cable is behind you and the product when you use the product. This
prevents damage to the extension cable.
3.6
Personal safety
•
Always put on a personal protective equipment to work with the machine.
-
Dust mask class FFP3 or higher
-
Hearing protection
-
Safety glasses with lateral protection
-
Protecting gloves
-
Safety shoes
•
Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
•
Stay alert, watch what you are doing and use common sense when operating the machine.
•
Make sure that the machine is stopped and all moving parts are complete standstill before any
inspections, adjustments and/or maintenance work is started.
•
All persons in the proximity of the machine, must wear hearing protection, safety shoes and safety
glasses.
•
Always seek professional medical attention immediately in case of injury.
•
Limit operator's exposure under the sun.
3.7
Fire extinguisher
•
Keep a fire extinguisher near during operation.
•
Use a powder fire extinguisher or a carbon dioxide fire extinguisher.
3.8
Machine safety general
•
Safety functions and operating functions must work correctly, examine them regularly.
•
Loose bolts and nuts are not permitted.
•
Never operate machine without the guards and/or safety devices in place.
•
Never change anything on the safety devices on the machine!
•
Do not use the machine if it is damaged.
•
Do not open or remove protective guards while driving gears are running.
•
Always wear gloves and only touch the handle grips. The temperature of certain machine parts can be
above 37°C. The machine can heat up during work, without a risk of getting burned.
21.07.2023
9
Advertisement
Table of Contents
