Table of Contents
Advertisement
To remove the diamond wings
1. Refer to chapter 3. Safety and put on a personal protective equipment.
2. Make sure that all moving parts of the machine are completely standstill before replace the wings.
3. Secure the grinding heads in the UP position with the quick release pins. There is one on each side of
each grind head.
4. Remove all the dust with a vacuum cleaner.
5. Remove the tools.
To install the diamond wings
1. Refer to chapter 3. Safety and put on a personal protective equipment.
2. Make sure all moving parts of the machine have come to a complete standstill before changing the
wings.
3. Safety the grinding heads in the UP position with the quick release pins. There is one on each side of
each grinding head.
4. Clean the Diamag plates with a vacuum cleaner to make sure that the diamond wings are attached
correctly to the plate. Dirt between the plates and wings causes the rough grinding results.
5. Install the tools.
4.5
Before start-up
Before start the operation personnel must read and understand the safety regulations given in this manual.
•
Put the grinding machine on to the surface to be processed.
•
Fit the appropriate diamond grinding wings that are required for this particular process.
Refer to chapter 4.4 of this manual.
•
Connect the machine to the electricity supply point. Make sure that the electric supply point is safe and
equipped with a ground connection and ground leakage circuit breaker. In case of doubt speak to the
local safety officer.
•
Do a check of the dust hoses for damages and obstructions. Make sure the Longopack bags of the dust
collector and pre-separator are empty. Observe the local regulations regarding waste disposal.
•
Before grinding, clean the surface. Make sure that there are no trash, stones, cloths, or oil on the
surface.
Remove all objects from the surface that can damage the machine. Remove reinforcing steel or other objects
protruding from the surface in order to prevent damage to the machine, the seals or diamond wings.
21.07.2023
17
Advertisement
Table of Contents
